R2AUDIO

Ir para o Conteúdo Principal »

Busca no Site

Category Navigation:

Você está agora em:

Hertz EP1D

Hertz EP1D

Hertz EP1D

Enviar para um amigo

Seja o primeiro a comentar este produto

Disponibilidade: Em Estoque.

Preço Normal: R$2.999,00

Preço Promocional: R$1.699,00

Acrescentar itens ao carrinho
OU

Descrição Rápida

 Amplificador 1ch
Hertz EP1D

  • Potência RMS @4 Ohm 1x400W
  • Potência RMS @2 Ohm 1x750W
  • Potência RMS @1 Ohm 1x1000W
  • Classe D
  • Nº de canais: 1 (mono)
  • The EP 1 D is a mono, 1000W (RMS) amplifier.
    The special EP LINK feature provides the ability to “strap” two or more pairs of EP 1 D into a bridged mode to achieve power output of up to 1700W (RMS).
    The EP 1 D features a Synchro D-Class technology, where the Output Stage PWM Driver Module generates its own digital clock and also generates the Power Supply PWM Driver clock in order to synchronize both of the stages, avoiding noise being generated inside the audio band. This technology has allowed an extremely high Signal/Noise ratio of 100dBA!
    The power supply section is equipped with two multi-winding toroidal core transformers along with Low ESR 105°C capacitors, ensuring very high efficiency.
    The EP 1 D boasts extreme reliability thanks to the use of FR-4 double layer PCB material. 70µm thick copper traces in combination with robust copper bars are used to increase the current transfer in the power supply sections.

    Descrição do Produto

    • Output Power (RMS):
    • 400W x 1 @4-ohm
    • 750W x 1 @2-ohm
    • 1000W x 1 @1-ohm
    • HP Link mode RMS Power:
    • 1500W x 1 (4-ohm - HP LINK)
    • 1700W x 1 (2-ohm - HP LINK)
    • Low Pass Filter: 25 - 250Hz @24dB/Oct (L+R)
    • Subsonic: By-pass / 10 - 50Hz @24dB/Oct
    • Output Phase Selector: 0/180 Degress
    • EP LINK mode: Master/Slave
    • Bass Boost: 0-18dB @50Hz
    • Output Filter: Continuous 0-180 @12dB/Oct
    • T.H.D. (100Hz @4-ohm): 0.15%
    • Bandwith (-3 dB): 10 - 250Hz
    • S/N Ratio (A weighted @1V): 100dBA
    • Damping Factor (100Hz @4-ohm) >100
    • Pre-In sensitivity: 0.3-5Volts
    • Pre-In impedence: 15 kohms
    • Speaker-In sensitivity: 1.4-24Volts
    • Speaker-in impendence@ 5kOhms
    • Load impendence: 4-1Ohms
    • Power supply voltage: 11 - 15Volts
    • Idling current: 2A
    • Idling current when off: 0.04mA
    • Consumption @1ohm, 14.4VDC: 56A
    • Remote In: 6-15 VDC - 1mA
    • Remote Out: 12 VDC - 50mA
    • Automatic Turn On/Off with speaker in
    • Fuse: 3x40A
    • RVC (A-remote Volume Control - OPTIONAL)
    • Dimensions (mm): 240 x 350 x 54

    Informações Adicionais

    Fabricante Hertz
    Montadora Não
    Prazo estimado para envio após faturamento: até 03 dias úteis
    Carro Não
    Preço R$2.999,00

    Tags do Produto

    Acrescentar suas Tags:
    Utilize espaços para separar tags. Utilize aspas simples (') para frases.
     

    Meu Carrinho

    Você não tem itens no seu carrinho de compras.